Fitting A Crank

This guide shows you the basics of fitting a crank and bearings into the cases.

You will need:

  • Engine cases
  • 2 x sets of bearings
  • Case bolts
  • Gasket sealer
  • Heat gun
  • 8mm socket
  • Rubber mallet
  • 2-stroke oil

First fit the bearings into the small case

Next fit the crank into the small case

Fit the second set of bearings

Then put the two halves together

Job done!

Address

Shiny Red Tuning


Unit 24, Merretts Mill Industrial Centre

Woodchester

Stroud

Gloucestershire

GL5 5EX

 

Tel: +44 (0)1453 298212

Email: info@shiny-red.net

AUTHORIZED DEALERS
Custom Search
PayPal Advance payment Cash on delivery
Paypal, Advance Payment, Cash
Print Print | Sitemap
© Shiny Red Tuning